Quad EL34 Mullard Xf2, the originals NIB, extremely well matched ! V192 193 194 197

Description

Here is a matched Quad Mullard Xf2 EL34 tubes made by Mullard in Blackburn, UK.

Detailed description

These Mullard Xf2 EL34 with single halo-getter and welded plate are from the Blackburn production site.The EL34 is a transmitting beam tetrode. The old Mullard production from the past century is known as the ‘crème de la crème’ of the EL34. These tubes deliver superior sonics compared to the Chinese and Russian new production EL34. Sonically many prefer the old welded plate types above the later stapled plate versions.  I refer to the many reviews on the web

All three tubes are new and from the same series and have date code Xf2 B 1B4. The fourth tubes is lightly used and has date code 2F3.

The Mullard EL34 Xf2 series is considered by many as an outstanding sounding EL34 tube; a lot better than todays production!

The quad has nice test values and excellent looks. Extremely well matched !

Note: my tubes are often not the cheapest. But is very hard to find better tubes !

Test results

The measurement data below show that the tubes are matched. 

Valve  V192

Ia (plate current): Transconductance (Gm): Gas test, Shorts test:

108  mA 13,0  mA/V OK

>  100 % >  100 %

Valve  V193

Ia (plate current): Transconductance (Gm): Gas test, Shorts test:

107  mA 12,9  mA/V OK

>  100 % >  100 %

Valve  V194

Ia (plate current): Transconductance (Gm): Gas test, Shorts test:

116  mA 12,8  mA/V OK

>  100 % >  100 %

Valve  V197

Ia (plate current): Transconductance (Gm): Gas test, Shorts test:

112  mA 12,7  mA/V OK

>  100 % >  100 %

Telefunken measuring values for new unused tubes:

• The rated emission value for a new EL34 is:  100 mA. 
• The rated transconductance value for a new EL34 is:  11 mA/V . 

For Telefunken specs info see last picture 

Test conditions & equipment:

Mutual transconductance, plate current, gas and shorts test equipment: AVO Mk IV (Dutch army tester) , AVO Valve Data Manual 23rd edition 1981, RFT stabilised mains, Utracer3+, Philips PE 4832, 2x Korad KA3005P programmable power supply, 2x Keithley 2700 and 2x Fluke 145. Test conditions: Ua (plate voltage) = 250 Volts, Us (screen voltage) = 265 Volts, Ug = -13,5 Volts and Uf = 6,3 V ± 3% (factory conditions). Please read our test page.

Summarized description